NXS CHASSIS FRONT END PARTS.

Front end parts for NXS brand chassis. Some of the dwarf car
and modlite parts you will find on this page will be spindles, and
aluminum hubs. Upper and lower control arms. Wheel bearings and seals
to fit our NXS chassis front ends.











Back to HOME page.
  • nXs Chassis
  • nXs Front End Parts
  • nXs Chassis Parts

  • About Us.
  • Brake System Parts.
  • Chassis Parts.
  • Cooling & Oil System.
  • Contact Us.
  • DMI Rearend Parts.
  • Drivetrain Parts.
  • Dzus, Spacers, fasteners.
  • Eletrical System.
  • Engine Parts.
  • Filters, Air, Oil, Fuel.
  • Fittings and Hoses.
  • Front End Parts.
  • Fuel System Parts.
  • Guarantees.
  • Harness' GSXR & ZX10.
  • Harness Trim Services.
  • Heims & Pinch Clamps.
  • Motors, GSXR, ZX10.
  • Payment Info.
  • Photos Modlite & Dwarfs.
  • Racing Links.
  • Returning Info.
  • Rims, Lugs, Spacers, Tires.
  • Rods, Swedge, Radius.
  • Safety, Belts, Seats, Suits.
  • Steering System Parts.
  • Suspension Parts.
  • Toyota Rearend Parts
  • Winters Q.C. Parts
  • Used GSXR Bike Parts
  • Used Modlite, Dwarf Parts.
  • Used Modlite, Dwarf 4 sale.

    		•

    NXS Left front spindle. This spindle will fit most all newer mod lite or dwarf car chassis. These spindles uses Winters Q.C. rearend hubs, which allows for the use of the Winters bearings, seals, and in most cases the rotors and caliper mounts. This in turns is much more cost affective for the racer. Less to hull to track and less extra parts to buy. Quality built and welded by certified welders for long lasting durability.
    ITEM# NSUPSLT...$169 ea.

    NXS Right front spindle. This spindle will fit most all newer mod lite or dwarf car chassis. These spindles uses Winters Q.C. rearend hubs, which allows for the use of the Winters bearings, seals, and in most cases the rotors and caliper mounts. This in turns is much more cost affective for the racer. Less to hull to track and less extra parts to buy. Quality built and welded by certified welders for long lasting durability.
    ITEM# NSUPSRT...$169 ea.

    NXS front spindle hub. This hub is same Winters rearend hub. Comes with races and 1/2 x 20 studs.
    ITEM# NSWFSH...$134 ea.

    Fits NXS chassis cars. Front Upper Control Arm. These are the newer style upper curved arm with 5/8" mono ball hole included right side. And has a 5/8 threaded end for heim.
    ITEM# NXSAUCR...$65

    Fits NXS chassis cars. Front Upper Control Arm. These are the newer style upper curved arm with 5/8" mono ball hole included left side. And has a 5/8 threaded end for heim.
    ITEM# NXSAUCL...$65

    Fits NXS chassis cars. Updated. 6-30-22
    Front Lower Right Control Arm. Is one inch longer to help with camber. 11IN. Has monoball, tab and shock perch welded in place. If upper hex rod attaches to pinch clmap a one inch longer (5") hex rod is used. If upper hex rod attached to a 3 hole welded bracket then a 4 inch hex rod is used.
    ITEM# NXSALCR2...$76

    Fits NXS chassis cars. Front Lower Left Control Arm. Arm.
    Has monoball, tab and shock perch welded in place.
    ITEM# NXSALCL...$70

    Fits NXS chassis cars serial numbers starting in 2024. For 2024 style round tube front clips. Front Lower Left Control Arm. Arm.
    Has monoball, tab and shock perch welded in place.
    ITEM# NXSLLCA...$70

    Fits NXS chassis cars serial numbers starting in 2024. For 2024 style round tube front clips. Front Lower Right Control Arm. Arm.
    Has monoball, tab and shock perch welded in place.
    ITEM# NXSLRCA...$70

    NXS lower control arm bracket. Fits both left or right side. Bolts to front cross member to connect lower control arm extension too.
    ITEM# NXSLCXB...$12

    NXS lower control arm extension. Has 1/2 fine right hand threads. Fits both left or right side.
    ITEM# NXSLCX...$30

    NXS front spindle hub cap. Includes 2 screws and Oring not shown.
    ITEM# NSWFSHC...$35 ea.


    NXS black anodized billet aluminum caliper mount for Winters Q.C.
    Aluminum caliper mount fit 3.25" caliper spacing. Are 5/8 inch thick, with 4 threaded holes for easy install.
    Item# NWCM325...$18.50
    NXS black anodized billet aluminum caliper mount for Winters Q.C.
    Aluminum caliper mount fit 3.75" caliper spacing. Are 5/8 inch thick, with 4 threaded holes for easy install.
    Item# NWCM375...$18.75
    NXS Front Aluminum Hub Studs is 3" long with 1/2" fine threads. These studs are fully threaded hardened wheel studs with allen heads. Each hub requires 4 studs. Fits both NXS Toyota and Chevette hubs.
    ITEM# NAFHS4....$4 ea

    NXS Spindle Upper or Lower 5/8" fine allen head bolts. Spindle requires two. Fits NXS spindles built before 3-1-21. ITEM#NASB1....$4 ea.

    New NXS Spindle Upper and Lower 1/2" fine allen head bolts. Spindle requires two. Fits all NXS spindles built after 3-1-21. ITEM#NASB2....$4 ea.

    NXS spindle hub bearing. Each hub requires 2 bearings.
    ITEM# NWIN7325..$16 ea.
    NXS spindle hub bearing seal.
    ITEM# NWIN7203..$9.30

    NXS spindle keyed washer.
    ITEM# NWIN1664..$2.90
    NXS spindle spindle nut.
    ITEM# NWIN5101T..$8.40
    NXS spindle slotted washer.
    ITEM# NWIN1665..$2.60

    NXS Superior spindle slotted washer screw.
    ITEM# NWIN7938..$1
    NXS spindle hubcap screws. Each hub requires 2.
    ITEM# NW7120..$1.75
    NXS spindle spiral snap ring.
    ITEM# NWIN7689...$5.00

    NXS spindle hub cap O-ring.
    ITEM# NXSCOR..$1
    NXS upper camber arm pinch clamp ITEM# NPC11..$22
    NXS upper camber arm pinch clamp angled engine block protector with 1/2"-13 x 3/4" long bolt.
    Bolts to NPC11 clamp.
    ITEM# NPC11AP..$5